Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 14, 2017 15:31:38 GMT -5
Some one that has a HP printer might have seen this:
I have a HP Officejet Pro 8710 printer and was browsing on the touchscreen one day and ran into this.
It listed how many of each page, envelope and photo that was printed from the day it was put in service, and you can't change anything.
I wanted to ask HP, but because it is out of warranty they would charge. At the time I didn't think to write down how I got there.
|
|
|
|
Post by jholland1964 on Jul 14, 2017 17:13:51 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 14, 2017 19:21:06 GMT -5
Over the past six months I've been thru that more then a few times. More then a few times I've sat in front of the printer with stylus in hand poking at the touchscreen when I had nothing better to do. I'll trip over it sometime in the future when I'm looking for something else. When you are fighting cancer you have plenty of sitting around time. |
|
|
|
Post by bigbarney on Jul 15, 2017 5:23:11 GMT -5
Some one that has a HP printer might have seen this: I have a HP Officejet Pro 8710 printer and was browsing on the touchscreen one day and ran into this. It listed how many of each page, envelope and photo that was printed from the day it was put in service, and you can't change anything. I wanted to ask HP, but because it is out of warranty they would charge. At the time I didn't think to write down how I got there. On one of the printers I use, an HP Officejet 6600, I can access this info two ways. Click on the Printer Assistant icon on my desktop, and then click on 'Maintain Your Printer' and then 'Device Reports' then click on the printer status button. This then prints a full report of evrything printed etc since the printer was installed. On the touchscreen, click on 'Setup' then scroll down to 'Reports' and then click on 'Printer Status Report'. This then prints the report as above. If you go to Page 137 of your manual, it tells you how to do this for your particular model.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 15, 2017 9:30:43 GMT -5
Big Barney----On the touchscreen, click on 'Setup' then scroll down to 'Reports' and then click on 'Printer Status Report'. This then prints the report as above. I went as far as "reports" then instead of "Printer Status report I scrolled down to "Usage Report' and found it. Thanks Attachments:
|
|
|
|
Post by bigbarney on Jul 15, 2017 9:53:46 GMT -5
That's good........glad to point you in the approximate direction!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 15, 2017 13:17:22 GMT -5
Now that I found it and printed it. I will fold it vertically and use for scrap paper.
|
|
